GW-260

Inquiry

Back to List

Product Specification

Type					GW-260
Heat output				Kcaℓ/h	260000
Water flow rate(50℃vertical lift)				ℓ/h	5200
Boiler body	Type			--	Vertical chimney
	Water content			ℓ	492
	Heat surface area			m2	8.4
	Turbulent plate			--	SUS304 Cross type
	Max working pressure			kg/cm2	5
	Proformance			kg/cm2	92%
Burner	Combustion method			--	Automatic Burner (Force draft fan)
	Type			--	G50
	Fuel consumption	13A		Nm3/h	28.5
	Fuel consumption	LPG		Kg/h	24.7
	Power source			--	1ψ220V
	Ignition system			--	High electric spark
	Motor output			KW	0.75
Control	Conbustion control			--	Automatic control
	Temperature control			--	Water temperature control
	Safety devices			--	Flame detection, temperature controller, pressure switch and safety combustion protection
Connection	Feed water pipe			mm	65
	Feedback water pipe			mm	65
	Cold water pipe			mm	65
	Blowdown pipe			mm	65
	Gas inlet		13A	mm	40
	Gas inlet		L P G	mm	25
Chimney diameter (outside)				mm	250
Net weight				Kg	670
Running weight				Kg	1162

NOTES：
1.	Standard power is 1Phase/220V. Notice of change, if any, is required.
2.	Fuel type：GW－Gas.
3.	Fuel consumption is calculated at low heat value : 13A=9900 Kcal/ Nm3, LPG PROPANE =11460 Kcal/kg, LPG BUTANE =10900 Kcal/kg.
4.	Gas supply pressure：13A : 200mmAq，LPG:280mmAq. Low pressure supply should be stable, pressure dropping can't be too much, and the gas flow should be enough.
5.	Products may be changed for improvement without notice.
6.	Boiler efficiency tolerance value±1%. Boiler dimension tolerance value±1%.